| Item | Parameters |
| Type | Technical parameter |
| Scope of application | 3.1 x 2.0mm FTTH Cable |
| Fiber Diameter | 125μm ( 657A & 657B ) |
| Cladding Diameter | 250μm |
| Suitable mode | singlemode |
| Operating time | about 100s (not including operate fiber time) |
| Insertion loss (dB) | ≤ 0.3dB (1310nm & 1550nm) |
| Return loss(dB) | ≤ -40dB |
| Bare fiber force | >5 N |
| Cladding layer force | >10 N |
| Tensile strength | >50 N |
| Operating temperature | -40~+75℃ |
| Online decoration test (20 N) | IL ≤ 0.2dB RL ≤ 5dB |
| Mechanical Endurance (500 times) | IL ≤ 0.2dB RL ≤ 5dB |
| Frustrated test(4cm high the cement ground every direction 1 time , in total 3 times) | IL ≤ 0.2dB RL ≤ 5dB |
| Item | Parameters |
| Application | 3.0 x 2.0 mm butterfly drop cable |
| Cladding Diameter | 125μm ( 657A & 657B ) |
| Coating Diameter | 250μm |
| Insertion Loss | ≤ 0.3dB（1310nm & 1550nm） |
| Reflection Loss | > 50dB |
| Rate of success | >95% |
| Clamping Force | >5 N |
| Tension | >20 N |
| Temperature Range | -40～+75℃ |
| Tension Test when installed (20 N) | △ IL ≤ 0.2dB △ RL ≤ 5dB |
| Mechanical Endurance (500 times) | △ IL ≤ 0.2dB △ RL ≤ 5dB |
| Fall-down Test (4 meters height, 3 time each direction) | △ IL ≤ 0.2dB △ RL ≤ 5dB |
| Item | Parameters |
| Application | 3.0 x 2.0 mm butterfly drop cable |
| Cladding Diameter | 125μm ( 657A & 657B ) |
| Coating Diameter | 250μm |
| Insertion Loss | ≤ 0.3dB（1310nm & 1550nm） |
| Reflection Loss | > 50dB |
| Rate of success | >95% |
| Clamping Force | >5 N |
| Tension | >20 N |
| Temperature Range | -40～+75℃ |
| Tension Test when installed (20 N) | △ IL ≤ 0.2dB △ RL ≤ 5dB |
| Mechanical Endurance (500 times) | △ IL ≤ 0.2dB △ RL ≤ 5dB |
| Fall-down Test (4 meters height, 3 time each direction) | △ IL ≤ 0.2dB △ RL ≤ 5dB |
Plot No. 319, Phase-1, Sector-38,
+91 9810104978
pawanjain@e-systemizer.com
www.e-systemizer.com
